It would be nice if it had an infrared output so it could emulate remote controls.
yes, we've been talking about just this feature. No firm plans yet, but we're figuring it out.
It would be nice if it had rf support that let it use the same rf keyboard as the link,
I see this happening either through an IR dongle receiver and above IR output or via Wifi, I can't see adding proprietary 2.4 GHz (or bluetooth frankly)
It would be much better if it charged through a usb cable.
agreed, we'll try to get this in a future version
It would be nice if it had usb host support to be able to use a usb keyboard with it.
I think as a controller, this is a bit far afield for where we're going with the device.
It seems to run pretty hot, have fairly short battery life per charge, and not support sleep/hibernate?
the slatedroid firmware does much better on the heat, power and battery life. Try flashing with that, and see what you think. go to the Wiki Page[url] for a link and instructions.
The specs posted seem off from the model I have....
The processor is a 300Mhz one, and the memory slot is microsd not sd. The box also claims 11n support
but my 11n network is 5Mhz so I can't test to see if that is right.
This was bad information from the factory, we've updated now, sorry for misleading folks. We posted what the factory gave us in good faith not realizing it was wrong. I'm really sorry about this and will, of course, accept any returns for anyone that was mislead and wants to return the unit. We'll waive the normal return period and pay for return shipping, etc.